Tuning In To A Preset Station - JVC KD-S731R Instructions Manual

3
Press and hold the number button (in
this example, 1) for more than 2
seconds.
7
4
Repeat the above procedure to store
other stations into other preset
numbers.
Notes:
• A previously preset station is erased when a new
station is stored in the same preset number.
• Preset stations are erased when the power supply to
the memory circuit is interrupted (for example, during
battery replacement). If this occurs, preset the stations
again.
"P1" flashes for a few seconds.

Tuning in to a preset station

You can easily tune in to a preset station.
Remember that you must store stations first. If you
have not stored them yet, see "Storing stations in
memory" on page 8.
1
Select the band (FM1 – 3, AM).
FM1
2
Select the number (1 – 6) for the preset
station you want.
7 8
FM2 FM3
AM
9 10 11 12
9