Rear Seats Rear Seats; Rear Seats (All Split Bench And Hybrid Full Bench) - GMC 2011 Sierra Owner's Manual

3-10 Seats and Restraints
Rear Seats
Rear Seats (Extended
Cab Full Bench)
Folding the Rear Seat
Notice: Folding a rear seat with
the safety belts still fastened may
cause damage to the seat or the
safety belts. Always unbuckle
the safety belts and return them
to their normal stowed position
before folding a rear seat.
To fold the seat:
1. Pull up on the front of the seat
cushion while pulling down on
the release strap under the seat
cushion.
2. Pull the seat cushion up until it
latches with the seatback.
3. Pull forward on the seat cushion
to make sure it is locked in
place.
I n f o r ma t i o n P r o v i d e d b y :
To unfold the seat:
1. Push the seat cushion rearward
while pulling the release strap
under the seat cushion. Pull
the seat cushion down until it
latches.
2. Pull up on the seat cushion to
make sure it is locked in place.
Make sure the safety belts are
not twisted or caught in the seat
cushion.
WARNING
A safety belt that is improperly
routed, not properly attached,
or twisted will not provide the
protection needed in a crash.
The person wearing the belt could
be seriously injured. After raising
the rear seatback, always check
to be sure that the safety belts
are properly routed and attached,
and are not twisted.