Morso 5660 Instalation Manual page 2

Installing the Morsø 5660Fireplace Insert Zero Clearance Enclosure
PRODUCT SAFETY
THESE FIREPLACE INSERT ZERO CLEARANCE ENCLOSURES ARE A LISTED COMPONENT
FOR AND ARE INTENDED FOR USE WITH THE MORSØ MODELS 5660 STANDARD AND
5660NA WOOD-BURNING FIREPLACE INSERTS ONLY. DO NOT USE OTHER PRODUCTS
NOT SPECIFIED OR LISTED FOR USE WITH THESE ENCLOSURES.
WARNING: IF THESE ENCLOSURES AND FIREPLACE INSERTS ARE NOT PROPERLY IN-
STALLED, A HOUSE FIRE MAY RESULT. TO REDUCE THE RISK OF FIRE, FOLLOW THE IN-
STALLATION INSTRUCTIONS EXACTLY. CONTACT LOCAL BUILDING OR FIRE OFFICIALS
ABOUT RESTRICTIONS AND INSTALLATION INSPECTION REQUIREMENTS IN YOUR AREA.
IT IS A GOOD IDEA TO REVIEW YOUR PLANS WITH THEM BEFORE BEGINNING THE INSTAL-
LATION. ASK YOUR MORSØ AUTHORIZED DEALER FOR HELP WITH LOCAL OFFICIALS IF
NEEDED.
WHEN INSTALLLED IN THESE FIREPLACE INSERT ZERO CLEARANCE ENCLOSURES IN THE
UNITED STATES, THE MORSØ MODELS 5660 STANDARD AND 5660NA FIREPLACE INSERTS
MUST ONLY BE CONNECTED TO ONE OF THE SPECIFIC CHIMNEYS LISTED ON PAGE 4 OF
THIS MANUAL.
DO NOT CONNECT THIS UNIT TO A CHIMNEY FLUE SERVING ANOTHER APPLIANCE.
PLEASE READ THIS ENTIRE MANUAL BEFORE YOU INSTALL AND USE THE FIREPLACE IN-
SERT ZERO CLEARANCE ENCLOSURE AND MORSØ MODEL 5660 STANDARD OR 5660NA
FIREPLACE INSERT. FAILURE TO FOLLOW INSTRUCTIONS MAY RESULT IN PROPERTY
DAMAGE, BODILY INJURY OR EVEN DEATH.
FOR FURTHER INFORMATION, REFER TO THE NATIONAL FIRE PROTECTION ASSOCIATION
ANSI/NFPA 211 STANDARD FOR CHIMNEYS, FIREPLACES, VENTS AND SOLID FUEL BURN-
ING APPLIANCES.
REFER TO THE MORSØ MODEL 5660 STANDARD OR 5660NA OPERATING INSTRUCTIONS
FOR INFORMATION ON THE PROPER USE AND MAINTENANCE OF THE FIREPLACE INSERT.
WARNING: THIS FIREPLACE INSERT ZERO CLEARANCE ENCLOSURE IS NOT A FIREPLACE.
BUILDING A FIRE IN THE ENCLOSURE WITHOUT THE MORSØ MODEL 5660 STANDARD OR
5660NA INSTALLED IS PROHIBITED AND MAY RESULT IN PROPERTY DAMAGE, BODILY IN-
JURY OR EVEN DEATH.
2