CHAP 3. SETUP MENU
6. Network Setup
To monitor and control videos remotely through network, you need to input the correct values.
6.1 IP Address
Set IP address of your DVR using arrow buttons. To move to other sub-menu, move cursor to
then press up or down button.
6.2 Subnet Mask
Set Subnet Mask of your DVR using arrow buttons. To move to other sub-menu, move cursor to
first, then press up or down button.
6.3 Gateway
Set Gateway of your DVR using arrow buttons. To move to other sub-menu, move cursor to
then press up or down button.
6.4 Bypass
- ON : It is recommended in Intranet connection. Its display speed is faster than "Bypass-OFF". But the
video will be crashed, if the network condition is not fast enough.
- OFF : It is recommended in Internet connection.
Its display speed slower than "Bypass ON".
Set On/Off using Left/right button.
6.5 Network ID
6.6 Password
You Must Register Your Network ID using Network Viewer first.
Press Enter button and set Network ID & Password using direction button.
To access DVR through Network Viewer program, you need to set same Network ID & Password to DVR.
To return to main menu, press MENU button.
1. we would like to recommend you to check your local Firewall or personal
network security programs. Sometimes they block certain ports for network
security purpose.
2. If you don't have right information about network configuration, please contact
your network administrator.
*000.000.000.000
*255.255.255.000
*000.000.000.000
ON/OFF
******** ( up to 8 letters)
******** ( up to 8 letters)
(All setting is in effective after when you exit the menu.)
52
Real Time Triplex Stand Alone DVR
position first,
position
position first,