Chap 3. Setup Menu; Getting Started - AVS PDVR-16100 User Manual

CHAP 3. SETUP MENU

Getting Started

First, it is important to make sure that the DVR power is off before connecting all the necessary video, monitor
and power cables to the DVR.
[ System initializing ]
You will see the above screen when you power on the DVR system properly.
It shows that the DVR starts and succeeds in detecting HDDs as master and slave.
1. Check if HDD has no problem after HDD installation because record function may not
work well due to HDD problem.
2. Contact your local distributor and exchange with new one when you find your HDD has
a problem.
You will see information of current available hard drives and CD burner as well as firmware version, when
you press Info button. To exit to normal display, press Info button again.
Real Time Triplex Stand Alone DVR
[ HDD detected properly ]
30