Starting An Application Using A Voice Command - Nokia 6260 User Manual

To add an application to the list of applications in the Voice commands main
view, select Options→New
to add and press Select.
2. The text Press 'Start', then speak after tone
• Press Start to record a voice command. The phone sounds a starting tone
and the note Speak now
3. Pronounce the voice command. The phone stops recording after approximately
5 seconds.
4. After recording, the phone plays the recorded command and the note
voice command is displayed. If you do not want to save the recording, press
Quit.
5. When the voice command has been successfully saved, the note
command saved is displayed and a beep sounds. A symbol
to the application.

Starting an application using a voice command

1. In standby mode, press and hold
Speak now is displayed.
2. When you are starting an application by saying a voice command, hold the
phone a short distance away from your mouth and pronounce the voice
command clearly.
3. The phone plays the original voice command and starts the application. If the
phone plays an incorrect voice command, press Retry.
Copyright © 2004 Nokia. All rights reserved.
application, scroll to the application that you want
is displayed.
is displayed.
. A short tone is played and the note
Playing
Voice
can be seen next
116