Nokia 6260 User Manual page 131

PIN code request - When the PIN code request is active, the code is requested each
time the phone is switched on. Note that some SIM cards may not allow the PIN
code request to be deactivated.
PIN code/PIN2 code/Lock code - Open this setting if you want to change the code.
Autolock period - You can set an autolock period, a time-out after which the
phone is automatically locked and can be used only if the correct lock code is
entered. Key in a number for the time-out in minutes or select None to turn off
the autolock period.
• To unlock the phone, key in the lock code.
Lock if SIM changed - Select Yes if you want the phone to prompt for the lock code
when an unknown, new SIM card is inserted into your phone. The phone maintains
a list of SIM cards that are recognised as the owner's cards.
Options in the Fixed dialling view are: Open, Call, Activ. fixed dialling
Deact. fixed dialling, New contact, Edit, Delete, Add to Contacts, Add from
Contacts, Find, Mark/Unmark, Help, and Exit.
Fixed dialling - You can restrict your outgoing calls to selected phone numbers, if
supported by your SIM card. You need the PIN2 code for this function. When this
function is active, you can only call those phone numbers that are included in the
fixed-dialling list or which begin with the same digit(s) as a phone number on the
list.
• Press to set Fixed dialling on.
• To add new numbers to the Fixed dialling list, select Options→New contact or
Add from Contacts.
Copyright © 2004 Nokia. All rights reserved.
131