Getting to know your Single Serve Turbo Brewer with Self Cleaning Water Cooler for use with Coffee Capsule or equivalently Pre-Packaged Coffee. FEATURES 2. High temperature, preheated hot 1. 2 in1 appliance saves on water is ready to pour through your valuable counter space.
Page 3
5. Sophisticated Advanced Technology System keeps water HOT and Energy consumption down. 6. Continuous dispensing for 6cups of coffee, no waiting time for heating water. Easy to use intuitive prompt menu. 7. Efficient refrigeration provides up to 0.8 gallon of X-cold water per hour, while making an ice bank for more and colder water.
Page 4
10. Exceptional hot tank performance and safety efficient, produce hotter water at all times, has a great insulation, triple safety, good for mineral water use. a. Our patented design maintain steady 201 temperature of hot water. Superior Mineral based insulation keeps heat where it belongs.
201 These parts of your cooler are automatically treated with metered amounts of ozone every 4 hours to eliminate bacteria growth. This process is an exclusive to Electrotemp Technologies Inc. and is covered by numerous patents.
SOUND’S YOU MIGHT HEAR Although all functions are very quiet, you might hear following sound’s: 1. When without display cooler plugged in, air pump for an ozone start to work and last for 12 seconds. After start up it will work every 4 hours for same period of time. Coolers with display are programmed to have ozone delivery pump to work every 4 hours starting from 12 o’clock.
ATTENTION To avoid damage, malfunctioning and plugging up top piercing needle. Do Not Use same K-Cup or an equivalently packed Single Serve Coffee Cup twice, do not use Espresso cups, use only K-Cup or an equivalently packed Single Serve Coffee Cups made for drip coffee use only. If flow and amount of dispensed water deteriorates, use paper clip to clean top piercing needle, as described in the manual.
SAFETY PRECAUTIONS WARNING To reduce risk of injury and property damage, user must read this entire manual before assembling, installing & operating combination unit providing coffee brewer and water dispenser. Failure to execute the instructions in this manual can cause personal injury or property damage.
SAFETY PRECAUTIONS - Electrical Requirements WARNING Electrical Shock Hazard Plug into a grounded 3 prong outlet. Make sure power prongs(lugs) and ground prong are in good condition, hot bent or altered in any ways. Do not remove ground prong. Do not use an adapter. Do not use an extension cord.
For future support please record your serial number (located on label on back of the unit) and date purchased. Staple your receipt to manual. You will need this information to obtain warranty service. Model Number : 8LCH-KK-SC-SSF Serial ID Number: Date of Purchase: Store:...
SPECIFICATIONS 120V~/60Hz / 12 Amp Power Supply R-134A Refrigerant Type 100W Max Cold Water Power 3 L/H Cold Capacity / Hour 3°C – 10°C / 37.4 F- 50 Cold Temp Range 1400W Hot Water Power 9 L/H Hot Capacity / Hour 89°C –...
ASSEMBLY WARNING Keep plastic bags away from children. 1. Remove dispenser from packaging. 2. Unpack drip tray and insert into dispenser. 3. Remove protective packaging from around probe. 4. Properly dispose of all packaging materials. INSTALLATION 1. Place water cooler upright. 2.
DISPENSING COFFEE -SEE INSTRUCTIONS FOR “HOW TO BREW COFFEE” Operating Instructions: 1. Make sure you have turned on RED hot energy savings switch at the back. See No. 15 on page 11. PRE- PRE- BREW READY BREW READY HEAT HEAT Touch “PRE-HEAT”button.
DESCALING YOUR COFFEE BREWER / WATER COOLER Your brewer and water cooler share a low watt density, external hot water tank heater. If has a larger area to spread heat comparing to ordinary internal water heating elements. You may experience a buildup of mineral scale or calcium deposits, depending on mineral content of the water.
OPERATION CAUTION This water cooler part of combination unit is intended for water cooling only, Do NOT use other liquids. Do NOT use for other purposes. Warranty is void if used for any other liquids including coffee, tea, juices, beer or wine. Using other liquids can be dangerous to your health. This water cooler has been designed to fit standard water bottles with a 3, 5 or 5.2 gallon capacity.
Notice: • At initial start-up it will take about 3 minutes for the reservoirs to fill. • Door must be closed to operate water pump. • If the lights continue to flash, your bottle may be empty. If problems persist, Call 1-855-7-MY-BREW for assistance.
3. Release control once desired fill level is achieved. 4. For dispensing coffee see instructions for “how to brew coffee”. Replace an Empty Bottle Notice: When your bottle is empty the water cooler will beep intermittently. You may also hear a sucking sound when the bottle empties. This is normal and is another way to be alerted that your bottle is empty.
Page 18
Sanitizing Perform: Perform half Yearly, if required. Air Filer Time Required: 15 minutes. Note: Do it prior to loading a fresh bottle. 1. Cleaning the probe assembly,unplug power cord from wall outlet. 2. Move dispenser away from wall and turn it 90 in either direction.
HOW TO ADJUST WATER TEMPERATURE FOR HIGH ALTITUDE TO AVOID BOILING In order to extract most of flavor from your Single Serve Cup your Brewer works at 201 F. It is good for elevations under 3500 feet. For higher altitudes need to reduce water boiling temperature. Follow instructions to make correct settings: - Immediately after power cord is plugged into the electrical outlet, you will hear an audible signal.
TROUBLESHOOTING Water cooler does not operate • Make sure the power cord is properly connected to a dedicated working outlet. • Make sure energy savings switches are turned on. Make sure the cooler is plugged in and the circuit breaker is not tripped. If needed, use another receptacle and confirm there is electricity going to the cooler.
Page 21
Water is leaking • If leak remains, remove the probe from the bottle and call 1-855-7-MY-BREW for assistance. Push buttons are stuck and/or faucets are leaking • Apply mineral oil (baby oil) to button slides to reduce friction. Cold water is not cold •...
Page 22
Touch keys on the sensor touch control board not responsive • Check to see if you touched two or more keys at the same time. If so, please move your hands away for awhile and try again. Wipe keys clean and dry. If not, perhaps your finger is too dry. Try moistening your finger and try again.
If blockage occurs in the exit nozzle, use unfolded paper clip to clean it out. Lower needle is not of tubular construction and does not go all the way through. It has U-shaped configuration with slot on its side.It has sealed end.
OPENING INSPECTION PORTHOLE WARNING To be performed by quali ed person only. Unplug unit by disconnecting power cord. Unscrew two holding screws from the Lift Coffee Capsule storage tray. back as shown. Beware of hot water. Report observations to service toll phone 1-855-7-MY-BREW.
Page 25
Notice! "Keurig ® and K-Cup ® are registered trademarks of Keurig, Inc. a subsidiary of Green Mountain Coffee Roasters, Inc., Electrotemp Technologies Inc. is not affiliated with Green Mountain Coffee Roasters or Keurig." Electrotemp Technologies Inc. 406 Watline Avenue Mississauga, Ontario, L4Z-1X2,Canada Toll free 1-855-7-MY-BREW www.electrotemp.com...