M-Audio Axiom Pro User Manual page 8

HyperControl for Pro Tools
4. Flip Button – Axiom Pro can operate in two different modes when using HyperControl: Mixer Mode and Instrument
5
Mode The functionality of the Flip button varies depending on the mode that you are in (the "F1" F-Key selects the mode;
see the "F-Keys" section below for more information)
Mixer Mode:
When Axiom Pro is in Mixer Mode, the flip button determines the function of the Slider buttons 1
Slider buttons select channels within your Pro Tools session However, pressing the Flip button 4 lets you step
through the other functions that the Slider buttons can perform (i e , record arm, mute, solo) When you press the
Flip button, the functionality of the Slider Buttons is listed near the lower-left side of the screen
Insert / Instrument Modes:
When Axiom Pro is in Instrument Mode or when an Insert is selected within Pro Tools, the Axiom Pro Sliders 2
control Pro Tools track volume settings whereas the Encoder knobs 5 control the parameters of your selected insert
plug-in or virtual instrument The Flip Button can be used to exchange (or "flip") the function of the Encoder knobs
and the Sliders This lets you use the Axiom Pro Sliders to adjust insert or virtual instrument settings, while using the
Encoder knobs to set track levels
Use this button to engage and disengage fader flipping When engaging this mode, "Flip Faders On" is displayed in
the lower-left side of the screen
N OTE:
✓
Encoder Knobs – These knobs automatically map to the parameters of the Pro Tools tracks or virtual instrument controls
5.
that are currently selected through Axiom Pro The "Using Pro Tools with HyperControl" section of this guide describes
how you can select different kinds of track and instrument parameters for these knobs to control
Soft-Keys – These four buttons correspond to the "Pages" displayed along the bottom of the LCD screen and let you
6.
access various parameters of your Pro Tools tracks (i e , volume, pan, and insert settings, send levels, etc ) and virtual
instrument settings The "HyperControl Display and Soft-Keys" section covers these buttons in detail
Only available on Axiom Pro 49/61
5
|
Axiom Pro
Switching back to Mixer Mode will cancel Flip Faders mode.
|
6
By default, the