Hypercontrol With Axiom Pro Hardware - M-Audio Axiom Pro User Manual

HyperControl for Pro Tools

HyperControl with Axiom Pro Hardware

9
8
1. Slider Buttons
buttons select channels, however, pressing the Flip button 4 lets you step through three other functions: record arm,
mute, solo
You can select multiple mixer channels by holding down the "Control" key on your computer keyboard while pressing the
Slider Buttons; holding the "Shift" key of your computer keyboard while pressing these buttons will select a range of mixer
channels For example, holding the Ctrl key and pressing "1" and "5" will select the first and fifth mixer channels in Pro
Tools; holding the Shift key and pressing "1" and "5" will select channels one through five on the Pro Tools mixer
✓ TI P: It is possible to set the Drum Pads or Numerical Keypad of your Axiom Pro to replicate keystrokes of your
standard computer keyboard (such as "Ctrl" or "Shift") This will allow you to select multiple Pro Tools mixer
channels using only the Axiom Pro keyboard (i e , no computer keyboard is required) Please refer to the
"Edit Mode > Group (Numerical Keypad)" section of the Axiom Pro User Guide to learn how to do this
2. Sliders – These sliders control their corresponding bank of eight faders in the Pro Tools mixer Note that all Pro Tools
4
track names that are currently under the control of Axiom Pro are outlined in blue, as shown below:
Selected Bank of Tracks (Controlled by Axiom Pro)
3. Master Fader
created a Pro Tools Master Fader track, this slider will have no effect on your session
N OTE: If you have created more than one Master Fader track, this slider will control the right-most Master Fader
✓
track in the Pro Tools mixer.
Only available on Axiom Pro 49/61.
4
|
Axiom Pro
6 10
– These buttons let you select, record arm, mute, or solo tracks within Pro Tools By default, these
4
– This slider automatically maps to the Master Fader track of your Pro Tools session; If you have not
4
1
2 3
4
Unselected Bank of Tracks
|
5
5
7