M-Audio Axiom Pro User Manual page 11

|
|
HyperControl for Pro Tools Axiom Pro 9
9. Load Button – This button brings up a prompt allowing you to load stored Axiom Pro patches Loading of patches is
covered in the "Function Buttons and Soft Keys" section of the Axiom Pro User Guide
Save Button – This button brings up a prompt allowing you to save the current settings of your Axiom Pro Saving of
patches is covered in the "Function Buttons and Soft Keys" section of the Axiom Pro User Guide
Hold (Load + Save Buttons) – By default, the LCD screen displays the position and status of the last control that was
used For example, if the screen is displaying the status of the drum pad group and you turn an encoder knob, the LCD
will immediately switch to the encoder group, highlight the encoder that was turned, and display that encoder's associated
parameter and value on the lower-left side of the screen
In certain cases, you may want to "hold" the information on the LCD, preventing the screen from updating when a control of
a different group is moved To do this, simultaneously press and hold the Save and Load buttons
When the display is locked, if you move a control outside the "locked" group, you will still see the control's parameter name
and value in the display, but the text on the LCD will remain in place
Pressing the Save and Load Buttons again will disable the Hold feature