Table of Contents
Advertisement
What is ImageLink?
When an MP3 or a WMA folder includes an
image <jml> file edited by Image Converter
(supplied in the CD-ROM), you can show the
image on the display while the tracks in the
folder are played back.
• While reading an image <jml> file, no
sounds come out ("Image Link" is shown on
the display during this period).
Album 1
(Folder 1)
Album 2
(Folder 2)
Display window
Photo1.jml
If there are more than one <jml> file in a
folder, a <jml> file with younger playback
order number will be shown on the display
(in the above example, "Photo2.jml" will be
used for Album 2).
Music001.mp3
Music002.mp3
Music003.mp3
Photo1.jml
Music004.wma
Music005.mp3
Music006.wma
Photo2.jml
Photo3.jml
Display window
Photo2.jml
To activate ImageLink, follow the procedure
below:
• See also "Changing the general settings
(PSM)" on page 36.
1
Press and hold SEL (select) for more than
2 seconds so that one of the PSM items
appears on the display.
2
Press number button 1 to select "MOVIE"—
Movie category of the PSM settings.
The "Graphics" setting screen appears on
the display.
3
Turn the control dial to select "ImageLink."
4
Press SEL (select) to finish the setting.
ImageLink starts functioning when the next
folder starts playing.
Note:
ImageLink will not work in the following cases:
• If no <jml> file is included in an MP3/WMA
folder.
• If Intro Scan is activated.
• If the source is changed to any other than "CD," or
• If you turn off then on the unit while "Image Link"
is shown on the display.
17
Advertisement
Table of Contents
