Sovereign SCS 37/1 Original Operating Instructions
  1. Manuals
  2. Brands
  3. Sovereign Manuals
  4. Chainsaw
  5. SCS 37/1
  6. Original operating instructions

Sovereign SCS 37/1 Original Operating Instructions

Petrol chain saw
Hide thumbs Also See for SCS 37/1:
Table of Contents

Advertisement

Quick Links

Original operating instruction
Petrol Chain Saw
" WARNING! PLEASE READ THESE INSTRUCTIONS
BEFORE OPERATING THIS UNIT"
"KEEP THIS MANUAL FOR FUTURE REFERENCE"
37/1
SCS

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SCS 37/1 and is the answer not in the manual?

Questions and answers

Related Manuals for Sovereign SCS 37/1

Summary of Contents for Sovereign SCS 37/1

  • Page 1 Original operating instruction Petrol Chain Saw " WARNING! PLEASE READ THESE INSTRUCTIONS BEFORE OPERATING THIS UNIT" "KEEP THIS MANUAL FOR FUTURE REFERENCE” 37/1...
  • Page 2 Read and follow the operating instructions and safety information before using for the first time. Always wear PPE (Personal Protective Clothing). Wear a safety helmet, eye and ear protection! Wear safety shoes! Wear gloves! Helpline No: UK 0151 649 1500 / IRE 189 094 6244...
  • Page 3 Please read these instructions carefully before installing and operating the petrol motor scythe! Petrol Engine Quick Start Guide Ensure correct fuel/oil mixture 40:1 STARTING 1. Set the On/Off switch to “On (I)” to start the machine. 2. Pull out the throttle lever until it locks. 3.
  • Page 4 Helpline No: UK 0151 649 1500 / IRE 189 094 6244...
  • Page 5 Helpline No: UK 0151 649 1500 / IRE 189 094 6244...
  • Page 6 Helpline No: UK 0151 649 1500 / IRE 189 094 6244...
  • Page 7 Helpline No: UK 0151 649 1500 / IRE 189 094 6244...
  • Page 8 Helpline No: UK 0151 649 1500 / IRE 189 094 6244...

  • Page 9: Table Of Contents

    Table of contents Page 1. General safety instructions 2. Layout 3. Proper use 4. Environmental protection 5. Installation 6. Before starting the machine 7. Operation 8. Technical data 9. Maintenance 10. Storage 11. Waste disposal 12. Ordering spare parts 13. Troubleshooting Helpline No: UK 0151 649 1500 / IRE 189 094 6244...

  • Page 10: General Safety Instructions

    Packaging IMPORTANT: The unit is supplied in packaging to prevent it from 1. Beware of recoil. being damaged in transit. The raw materials in this 2. Do not hold the saw in one hand. packaging can be reused or recycled. 3.
  • Page 11 Read all these instructions before operating this doors. An explosion and/or fire may result. product and save these instructions. 20. Do not tank fuel, oil or lubrication when the engine of chain saw is running. 1. DO NOT operate a chain saw with one hand! 21.

  • Page 12: Layout

    2. Layout (Fig. 1) appropriate training. The manufacturer cannot be held liable for damage caused by improper or incorrect usage. 1. Chain bar 2. Saw chain Please note that our equipment has not been 3. Chain tensioning screw designed for use in commercial, trade or industrial 4.

  • Page 13: Before Starting The Machine

    4. Pull the chain bar forward until the chain is closely Caution: If the saw chain is TOO LOOSE or TOO seated. Make sure that all the drive links are in TAUT, the drive wheel, chain bar, chain and crank the groove of the bar.

  • Page 14: Operation

    7.1 Starting the engine Warning: Never use straight fuel in your unit. 1. Set the On/Off switch (A) to “Off (O)” (Fig. 9A). This will cause permanent engine damage and void 2. Take the Brake off by pushing the lever back. the manufacturer’s warranty for that product.
  • Page 15 NOTE: Direction of fall (B) is controlled by the branches from a fallen tree. Do not remove notching cut. Before any cuts are made, consider the supporting limbs (A) until after the log is bucked (cut) location of larger branches and natural lean of the into lengths (Fig.

  • Page 16: Technical Data

    8. Technical data Test chain brake as follows (Fig. 10) : 1. Place saw on a clear, firm, flat surface. 2. Start engine. Engine displacement 37.2 cm 3. Grasp the rear handle (A) with your right hand. Maximum engine capacity 1.2 kW 4.
  • Page 17 Note: Do not pull hose completely out of tank. tip. 4. Lift filter (A) out of tank (Fig. 19). To lubricate sprocket tip 5. Pull off the filter with a twist and clean it; if the Lubrication of the sprocket tip is recommended after filter is damaged, dispose of it.

  • Page 18: Storage

    automatic oiler system. Chain tension Check the chain tension frequently and adjust as Automatic chain lubrication. often as necessary to keep the chain snug on the bar, The chain saw is equipped with an automatic oil but loose enough to be pulled around by hand. (see lubrication system with a toothed wheel drive.

  • Page 19: Waste Disposal

    Note: Store the unit in a dry place and away from possible sources of ignition such as a furnace, gas hot water heater, gas dryer, etc. Puttig the saw back into operation 1. Remove spark plug (see also point 9.4). 2.

  • Page 20: Troubleshooting

    13. Troubleshooting Problem Probable cause Corrective Action Unit won’t start or starts but will not Incorrect starting procedures. Follow instructions in the User run. Manual. Incorrect carburetor mixture Have carburetor adjusted by an adjustment setting. Authorized Service Center. Fouled spark plug. Clean / gap or replace plug.
  • Page 21 Helpline No: UK 0151 649 1500 / IRE 189 094 6244...
  • Page 22 EÚ a noriem pre výrobok og standarder for artikkel A a cikkekhez az EU-irányvonal és Normák szerint a E Lýsir uppfyllingu EU-reglna og annarra staðla vöru következő konformitást jelenti ki Petrol Chain Saw SCS 37/1 (Sovereign) 2009/105/EC 2006/42/EC Annex IV 2006/95/EC Notified Body: TÜV Rheinland LGA Products GmbH, Tillystraße 2, D-90431 Nürnberg...
  • Page 23 To take advantage of this service, please send the device to our service address. Sovereign Customer Helpline UK: 0151 649 1500 / IRE: 189 094 6244 Helpline No: UK 0151 649 1500 / IRE 189 094 6244...
  • Page 24 The reprinting or reproduction by any other means, in whole or in part, of documentation and papers accompanying products is permitted only with the express consent of ISC GmbH. Technical changes subject to change EH 03/2010 (02)

Table of Contents