Single Pa-208A; Several Units Of Pa-208A; Single Unit On Tripod - Master audio PA208A User Manual

Amate Electroacústica,s.l.

4.2. Single PA-208A

A single PA-208A may be used on a tripod stand or on a pole over its companion
subwoofer. The use of a subwoofer is recommended for applications requiring more
low-frequency power and extension.
The adjustable pole-socket will position the speaker with the baffle +23.5º to the floor
(maximum) or -12.5º to the floor (minimum).
Usually, the HFC switch on the connection panel should be set at -3 dB when a single
speaker is used.
Fig.6. Single unit on tripod

4.3. Several units of PA-208A

Flying several units of PA-208A is easy, fast and secure. To perform any operations
related to flying the system, read the present document, and act on the warnings and
advice given.
Only experienced installers with adequate knowledge of the system and local safety
regulations should fly speaker cabinets.
It is the user's responsibility to ensure that the systems to be flown and the flying
accessories (such as chains, eyebolts, lock pins...) comply with state and local
regulations. They should be regularly inspected and replaced if in doubt.
When flying enclosures from ceiling support structures, extreme care should be taken
to assure the load bearing capabilities of the structures. Do not fly systems from
unsafe structures.
All flying accessories that are not supplied by Amate Electroacústica are the user's
responsibility. Use at your own risk.
Remember that no risks should be taken with regards to public safety.
PA208A.Ver 1.0 May 09
22