Advertisement
Steering Wheel Control Interface
Installation
Please visit www.pac-audio.com/controlpro/App to download the smartphone or PC application that provides
vehicle specific wiring and configuration processes. We recommend that all wiring connections be soldered
to ensure a sturdy and reliable connection.
Configuring/Programming
App Mode
With this method, the CP5 can be connected to a smartphone, tablet or PC in which the application assigns the vehicle and SWC
button functionality. The dipswitches on the side of the interface must all be set to down which is the default position. When using
this method, it is not required to manually program the SWC buttons.
1. Visit www.pac-audio.com/controlpro/app to download your device specific application. (PC, Apple or Android)
2. Connect the CP5 to your device. If you are using a phone or tablet you must connect power to the CP5 and the supplied USB
adapter to the CP5. If you are using a PC, neither power or the supplied adapter is required. PLEASE NOTE: When using a
PC it may be necessary to update your Microsoft .NET Framework. If you require this update your PC will automatically notify
you. If you do not get a notification then you do not require the update.
3. Launch the application or software and follow the on screen prompts.
Manual Configuration Mode
With this method, the CP5 uses a pre-determined dipswitch configuration to assign the vehicle and SWC button functionality.
The dipswitches on the side of the interface must be manually set to the proper configuration by the user. These vehicle specific
dipswitch settings can be found by downloading your device specific application from www.pac-audio.com/controlpro/app. If you
wish to re-assign button functions or use short press/long press dual command functionality, please follow the button re-assignment
procedure outlined on page 5.
1. Please Visit www.pac-audio.com/controlpro/app to download your device specific application. (PC, Apple or Android)
2. Launch the application or software and find your vehicle/radio combination.
3. Set the vehicle dipswitches according to the application.
4. Set the radio dipswitches according to the chart below.
5. Wire up the interface according to the installation instructions in the application.
Manual Programming Mode
With this method the SWC values must be manually programmed into the CP5 by using either the app or the programming button.
The vehicle dipswitches on the side of the interface must all be set to up. PLEASE NOTE: This mode is only compatible in
vehicles with both analog SWC and a discrete 12v Accessory wire. Vehicles with CAN-Bus buttons cannot be manually
programmed.
1. Visit www.pac-audio.com/controlpro/app to download your device specific application.
2. Launch the application and find the installation instructions for your vehicle.
3. Set the radio dipswitches according to the chart below.
4. Wire up the interface according to the installation instructions in the application.
5. Connect the CP5 to the vehicle
6. You can now either connect the CP5 to a device and use the app to program the SWC values or follow the programming
instructions on the next page.
Alpine
Clarion
Pacific Accessory Corporation
Pacific Accessory Corporation
TM
Radio Dipswitch Settings
Fusion
JVC
Other ‐ Advent, BOYO, Dual, Lightning Audio, Visteon, Rockford Fosgate
| Santa Ana, California 92705 | Ph. 866-931-8021 | support@pac-audio.com
®
©2013 Pacific Accessory Corporation
www.pac-audio.com
Universal Steering Wheel Control Retention Interface
Kenwood
Other
SWI-CP5
Pioneer
Sony
Rev. 012014
Page 2
Advertisement
