Advertisement
Quick Start Guide
UCH-250 Fax Server
The UCH-250 fax server is a fully managed store-and-forward system that
provides the most reliable faxing over the mini-VSAT Broadband
Simply hook it up between your G3 fax machine and TracPhone
Connecting the UCH-250
Connect the UCH-250 to your fax machine,
TracPhone V7, and vessel AC power:
1
Using a standard phone cable, connect
1.
your fax machine to the RJ11 port on
the UCH-250.
2
Using a straight-through Ethernet
2.
cable, connect the UCH-250 to the
router/switch (not the MTA) that is
connected to the TracPhone V7.
3.
Connect the supplied power supply to
3
the power jack on the UCH-250 then
plug it into 110V or 220V AC power.
Status LEDs
LED
Mode 1, 2, 3
Network
Modem
Pending
Wait
Error
Power
Description
Not used
Connected to V7 LAN
Fax machine ready
Fax in progress
Do not disconnect
Incoming fax failed
Input power OK
sm
service.
®
V7!
1
2
3
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for KVH Industries UCH-250
Summary of Contents for KVH Industries UCH-250
- Page 1 Quick Start Guide UCH-250 Fax Server The UCH-250 fax server is a fully managed store-and-forward system that provides the most reliable faxing over the mini-VSAT Broadband service. Simply hook it up between your G3 fax machine and TracPhone ® Connecting the UCH-250...
- Page 2 Call Logic Destination Fax Management Gateway Machine on Shore Server For More Information Visit www.on-go.com for UCH-250 manuals and product support. ©2008 KVH Industries, Inc., All rights reserved. KVH and TracPhone are registered trademarks of KVH Industries, Inc. (54-0566 Rev. A)
Need help?
Do you have a question about the UCH-250 and is the answer not in the manual?
Questions and answers