Table of Contents
Advertisement
Plumbing Systems and Holding Tanks
• Seriously clogged P-traps may require disas-
sembly. Be careful not to overtighten when
reassembling.
• Do not use harsh household drain cleaners.
• Do not use motorized drain augers.
• Sometimes the holding tank valve will get
clogged. In this case, a hand-operated auger
may be necessary. Be ready to close the valve
quickly once the clog is cleared. If the seal
gets damaged, it is easily replaced.
American Eagle and Tradition Utility Compartment (detail varies depending on product)
GREY TANK WATER
BLACK TANK WATER
PUMP SWITCH
PAPER TOWEL
HOLDER
SANI-FLUSH VALVE
SANI-FLUSH CONECTION
Heritage Utility Compartment (detail varies depending on product)
07-8
GFI OUTLET
PUMP SWITCH
12 VOLT OUTLET
SEWER HOSE CONECTION
Cold Weather Usage
The holding tank(s) area is heated through ducts
from the furnace. To prevent holding tank freeze
up, the furnace thermostat should be set to main-
tain a minimum of 33 degrees Fahrenheit in the
holding tank(s) area, Be aware that exposed drains
may freeze quickly.
SPRAY
NOZZLE
SENSATANK TANK MONITOR
MULTIPLEX SWITCH
HOT & COLD VALVES
SPRAY NOZZLE
FOR SPRAYER
SOAP DISPENSER
WATER TANK
BYPASS
CARGO LIGHT
CITY WATER CONECTION
Hide quick links:
Advertisement
Table of Contents
