Advertisement
Connecting A Liquid Propane Gas (LPG) Cylinder To
The Grill
1. Place the fixed gas cylinder in the designated hole in
the bottom of the cart. Attach tank clamp to cylinder
and cart using wing nut (supplied with the cart). Make
sure the LPG cylinder valve is in the full OFF position.
(Turn clockwise to close.)
2. Check the cylinder valve features to ensure it has prop-
er external mating threads to fit the hose and regula-
tor assembly provided. (Type connection per ANSI
Z21.58a-1998)
3. Make sure the burner valve is in the OFF position.
4. Inspect the valve connection port and regulator as-
sembly. Look for any damage or debris. Remove any
debris. Inspect hose for damage. Never attempt to use
damaged or plugged equipment.
5. Connect brass fitting on the end of the hose/regulator
assembly to valve of grill (remove red cap from valve).
6. When connecting the hose and regulator assembly to
the cylinder valve, hand tighten nut clockwise to a full
stop (see Figure ). DO NOT use a wrench to tighten
because it could damage the Quick Coupling Nut and
result in a hazardous condition.
7. Open the cylinder valve fully (counterclockwise). Use
a commercially-available, non-corrosive leak check
solution to check all connections for leaks before at-
tempting to light the grill. If a leak is found, turn the
cylinder valve off and do not use the grill until repairs
are made.
Figure 1
Connecting Gas Cylinder
Fire Stone Home Products • Legacy Gas Grill • Rev. C
0
Disconnecting A Liquid Propane Gas (LPG) Cylinder
From The Grill
. Turn the burner valves and LPG cylinder valve to the
full OFF position. (Turn clockwise to close.)
2. Detach the hose and regulator assembly from the LPG
cylinder valve by turning the Quick Coupling Nut coun-
terclockwise.
CAUTION: When the appliance is not in use, the gas
must be turned off at the supply cylinder.
Congratulations
Your Legacy-24i/36i gas grill is now ready for use. Be-
fore the first use and at the beginning of each sea-
son (and whenever the LPG gas cylinder has been
changed):
. Read all safety, lighting and operating instruc-
tions.
2. Check gas valve orifices, burner tubes and burner
ports for any obstructions.
3. Perform gas leak check according to instructions
found in this manual.
Hide quick links:
Advertisement
