Garmin Zumo 600 Series Owner's Manual page 37

add (or Subscriptions > add)—add a
c to purchase a
subscription.
reused. You must obtain a new code each
time you renew your service. If you own
obtain a new code for each receiver.
Touch > > Bluetooth.
Tools Settings
Phone or audio—select add
with a device that has Bluetooth wireless
technology. To listen to high-quality audio
wirelessly, connect to a Bluetooth headset.
See pages 20–22. Select
Change
PIN code (or passkey) is 1234.
Drop—select the device you want to
disconnect, and touch Yes.
remove—select the device you want to
Yes.
Bluetooth—enable and disable the
Bluetooth component. The
icon appears on the Menu page if the
Bluetooth component is enabled. To prevent
a device from automatically connecting,
select Disabled.
Friendly name—enter a friendly name
Bluetooth technology. Touch Done.
restore—restore the original Bluetooth
> oK to pair settings. This does not clear the pairing
information.
to pair and
You must have proximity points (such as
custom POIs, a safety camera database,
or a TourGuide
Bluetooth
proximity point settings. See
Touch Tools
Proximity alerts—touch
alerts on or off when you approach custom
POIs or safety cameras.
Tourguide—set how you want the audio for
TourGuide to be activated. Select
to hear the complete tour as programmed,
Prompted
the map when tour information is available
during your route, or off.
restore—restore the original proximity
points settings.
®
pages 38–39.
> Settings > Proximity Points.
Change to turn the
auto Play
to show the speaker icon on