Table of Contents
Advertisement
GPS/Wireless System Wiring Diagram
Installing the GPS/Wireless System
See the installation diagram below for correct placement and installation of all
the components in the GPS/Wireless System into a vehicle:
Wireless
On-Board Module
#8129
Cable must enter
unit from the top
Note: If using a DriveRight 600 with a #8157 GPS Module, place the #8157 GPS antenna in the
same location as the #8128 GPS Module shown in the drawing above.
1. Place the GPS/Wireless Interface Module under the dashboard of the
vehicle, near the DriveRight 600
2. Secure the GPS/Wireless Interface Module in place using the provided
cable ties, two pieces of velcro tape, or two pieces of double-sided tape.
8
GPS Module
#8128
Situated line-of-sight
to the sky
GPS/Wireless
Interface Module
#8127
device or SmartCard On-Board Reader.
E
Advertisement
Table of Contents
