Restoration Of Factory Setting (Reset) - Quanzhou 9900 Operation Instructions Manual

Rotate the tuning knob (DIAL) to select "OFF (turn-off ) or 30S, 60S......600S (an
4.
interval of 30S)".
5. Shortly press the tuning knob (DIAL) to confirm the storage of the required value .Or
shortly press 【EXIT】to return to the context menu mode without storage.
Shortly press 【EXIT】to exit the context menu mode.
6.
When the transmission TOT is time-out, the walkie talkie will emit a prompt tone and
automatically return to the receiving mode. To continue the transmission, release the 【PTT】 key
on the handheld microphone and then press it again.
Restoration of Factory Setting
If misoperation or wrong setting has lead to the inability to use this product normally, you may
utilize this function to restore all settings of the product to factory default settings.
1. Shortly press the tuning knob (DIAL) to enter the context menu.
2. Rotate the tuning knob (DIAL) to select Item
3. Shortly press the tuning knob (DIAL) to set the current context menu.
Rotate the tuning knob (DIAL) to select "RST-NO (do not reset) or RST-YES (reset)"
4.
 When the RST-YES (reset) is selected, all menus of the main and secondary
frequency bands will be reset to the factory default status.
 The reset will not clear the information in the memory channels.
5. Shortly press the tuning knob (DIAL) to confirm the storage of the required value .Or
shortly press 【EXIT】to return to the context menu mode without storage.
Shortly press 【EXIT】to exit the context menu mode.
6.
29 on the context menu.
40