Table of Contents
Advertisement
Use NLGI-2 Extreme Pressure Lubricant Grease or equivalent.
Front Axle King Pins:Make sure tires touch the ground. DO NOT RAISE THE VEHICLE. Lu-
All other fittings: May be lubricated in any position.
Automatic Adjusters on disc brakes: Lubrication should be left to qualified personnel.
1. Tie Rod (1 Fitting Each End)
2. Disc Brake Caliper Slide Rails
3. Kingpins (2 Fittings Each Side)
4. Drag Link (1 Fitting Each End)
6. Steering Column Extension
Replace filter and fluid every 25,000 miles.
Use SAE Grade 15w40 motor oil, API designation CD, CD-II, or CE.
Other symbols may appear in conjunction with above.
Foretravel Owners Manual
CHASSIS LUBRICATION
bricate the king pins through the grease fittings on the top and bottom of the
knuckle. Apply lubricant until new lubricant comes from the thrust bearing
seal and the upper shim pack.
U270, U295, U320, AND GV320
HYDRAULIC SYSTEM
Chassis Series
U270/U295
Cummins ISL 400
U320
Cummins ISM 450
Rev. 01-03
Appendix A - Lubrication and Capacities
7. Universal Joints
8. Propeller Shaft Spline
9. Disc Brake Caliper (3 Fittings Each Brake
10. Front Wheel Bearings
11. Rear Axle Differential
Capacity
System
23 qts. (Approx.)
System
24 1/2 qts. (Approx.)
Page A-3
Advertisement
Table of Contents
