Table of Contents
Advertisement
WArNING
• The GlobeSurfer
III is intended for use only when powered by the external power supply shipped together with the equipment or via a replacement
®
power supply available from Option. The use of any other power supply may invalidate regulatory approval of this equipment. Refer to the table
below for applicable power supplies.
• GlobeSurfer
III is intended for indoor use only and its interconnection points shall not be connected outside of any premises (i.e. outside of any
®
buildings). Refer to the table below for each interconnection point found in this user instruction.
• GlobeSurfer
III is regarded a class III equipment where protection against electric shock is provided by means of power supplied from SELV circuit
®
i.e. external power supply and does not generate hazardous voltages within itself.
• The GlobeSurfer
III is intended to be used with a POTS (phone) and LAN cable with maximum length of 3 m. If a longer LAN cable is used it must
®
be shielded in order not to invalidate regulatory approval.
Applicable power supplies
Power supply
manufacturer
GS2 AC/DC adapter
PHIHONG
Equipment interconnection points
Interconnection
category
DC input connector
SELV
SIM card connector
SELV
External antenna
SELV
connector
LAN connector
SELV
Telephone connector
TNV2
Rated Input Voltage
Maximum Input Voltage
5 VDC
SELV interconnections must only be connected to other equipment that complies with requirements of SELV-circuits as defined in EN60950 directive.
TNV2 interconnections must only be connected to other equipment that complies with requirements of TNV2-circuits as defined in EN60950 directive.
model
PSA15R-050P
type
5.5/1.2mm DC jack
SIM type (ISO7816)
MC-CARD type
RJ45
RJ11
3
Advertisement
Table of Contents
