MICATHERMIC PANEL HEATER Instructions for use Proudly distributed by De’Longhi New Zealand Limited 25 Carbine Road Mt Wellington Auckland, New Zealand De’Longhi Australia Pty Ltd PO Box 58-056 Po Box 4156 Greenmount MILPERRA BC NSW 1891 Manukau 2141 Australia Auckland, New Zealand...
Page 2
1.0 m fig.1 0.7 m Function selector Pilot lamp Thermostat fig.2 0.6 m 0.7 m fig.3 0.6 m...
Page 4
HOW TO USE YOUR MICATHERMIC PANEL HEATER Thank you for choosing this Dè Longhi heater. Please read this instruction booklet carefully before using this heater. By doing so, you will obtain optimum results with maximum safety. 1. General instructions Remove the heater from the packaging. Check that neither the heater nor the power cable has been dam- aged during transport.
Page 5
6. Functioning and use. (One power level models) Turn the thermostat knob in a clockwise direction until it reaches the 6 setting. Turn the function knob to setting 1 (the pilot light will come on). Switching off: turn the function knob to the “0” setting. 7.
Need help?
Do you have a question about the MICATHERMIC PANEL HEATER and is the answer not in the manual?
Questions and answers