Changing The Image Quality - Canon PowerShot SD 1400 IS User Manual

Changing the Image Quality

You can choose between three image quality settings.
Image Quality Table
Image Quality
(Recording Pixels/Frame Rate)
1280 x 720 pixels, 30 frames/sec. For shooting high-definition movies.
640 x 480 pixels, 30 frames/sec.
320 x 240 pixels, 30 frames/sec.
Estimated Shooting Time
Image Quality
• Based on Canon's testing standards.
• Recording will automatically stop when the clip file size reaches 4 GB or when the
recording time reaches approximately 10 minutes when shooting in
approximately 1 hour when shooting in
• Recording may stop even if the maximum clip length has not been reached on some
memory cards. SD Speed Class 4 or higher memory cards are recommended.
Choose the image quality setting.
●
After pressing the m button, press the
op buttons to choose
the m button again.
Choose an option.
●
Press the op buttons to choose an
option, and press the m button.
X
The setting will appear on the screen.
For shooting standard quality movies.
Since the number of recording pixels is smaller,
the image quality will appear coarse when
compared with
times the length.
Shooting Time
4 GB
21 min. 23 sec.
46 min. 46 sec.
2 hrs. 23 min. 41 sec.
or .
, then press
Content
, but you can record three
16 GB
1 hr. 27 min. 37 sec.
3 hrs. 11 min. 32 sec.
9 hrs. 48 min. 19 sec.
, and
101