Page 1
2001 by Harbor Freight Tools . All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions please call 1-800-444-3353 REV 04/06...
KEEP CHILDREN AWAY FROM PRODUCT USAGE AREA. Do not allow children to handle this product. USE EYE PROTECTION. Wear ANSI-approved safety impact eye glasses. ANSI-approved safety impact eye glasses are available from Harbor Freight Tools. CHECK FOR DAMAGED PARTS. Before using this product, carefully check that it will operate properly and perform its intended function.
When unpacking, check to make sure all parts shown on the Parts List (page 6) are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
Page 4
To Use The Caliper: To measure the outside diameter of an object see Figure B. FIGURE B FIGURE C To measure the inside diameter of an object see Figure C. SKU 40926 For technical questions, please call 1-800-444-3353. Page 4...
LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABIL- ITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. SKU 40926 For technical questions, please call 1-800-444-3353. Page 5...
Inside Diameter Jaws Step Measuring Surfaces Depth Measuring Surface PARTS ASSEMBLY NOTE: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. SKU 40926 For technical questions, please call 1-800-444-3353. Page 6...