Units - Speed (With Speed Input Only); User Mode; Language (International Models Only); Triplog Reset (With Speed Input Only) - Humminbird 800 series Operation Manual

Units - Speed
(with Speed input only)
Settings: Domestic Models: mph, kts; International
Models: kph, mph, kts; Default = mph/kph
Units - Speed selects the units of measure for speed-related readouts, and
will appear in the menu if a Temp/Speed Accessory is connected and the
paddlewheel has moved at least once, or if the GPS Receiver is connected.

User Mode

Settings: Normal, Advanced; Default = Advanced
User Mode sets the menu system to Normal or Advanced. When set to
Normal, the basic set of menu options are shown in the menu system. When
set to Advanced (default setting), additional menu options are added to the
menu system. See Main Menu: User Mode for details.
Language
(International Models only)
Settings: Various, Default = English
Language selects the display language for menus.
Triplog Reset
(with Speed input only)
Settings: Press the RIGHT Cursor key and follow
screen instructions to activate.
Triplog Reset resets the Triplog to zero, and will appear in the menu if a
Temp/Speed Accessory is connected and the paddlewheel has moved at
least once, or if the GPS Receiver is connected.
Setup Menu Tab
The Triplog provides the following information: timer for elapsed time,
distance traveled since last reset, and average speed.
NOTE: See Views to find out how to display Triplog information on the screen.
Use this menu choice with caution!
Restore Defaults resets ALL menu settings to their factory defaults.
Use this menu choice with caution!
Format Nav Directories deletes ALL navigation data (waypoints, routes,
tracks, and groups) and resets the navigation data directory in the Waypoint
Management dialog box. You may need to reset the navigation directory if
you've imported corrupted navigation data from an unknown source, which
can cause the unit to malfunction (see SD Memory Card Slot: Import
Navigation Data). Contact our Customer Resource Center before using this
menu option.
NOTE: It is important to back up your control head's data files periodically. Data
files should also be saved to your PC before restoring the unit's defaults or
updating the software. See your Humminbird® online account at
humminbird.com and the Waypoint Management guide.
110

Restore Defaults

Settings: Press the RIGHT Cursor key and follow
screen instructions to activate.

Format Nav Directories

Settings: Press the RIGHT Cursor key and follow
screen instructions.