Setup - Predator 61725 Owner's Manual & Safety Instructions

Set Up
Read the ENTIRE IMpORTANT SAFETY INFORMATION section at the beginning of this manual
including all text under subheadings therein before set up or use of this product.
TO pREVENT SERIOUS INJURY:
Operate only with proper spark arrestor installed.
Operation of this equipment may create sparks that can start fires around dry vegetation.
A spark arrestor may be required.
The operator should contact local fire agencies for laws or regulations
relating to fire prevention requirements.
Components and Controls
Display
IF POWER SHUTS OFF WITH ENGINE RUNNING:
1. UNPLUG DEVICES
2. RESET ALL CIRCUIT BREAKERS
3. MAKE SURE DEVICE AMPS ARE LESS THAN 92 TOTAL (120VAC)
HC = Current
Hours
HT = Total
Hours
V = Voltage
Hz = Hertz
IF ANY CIRCUIT BREAKERS TRIP ENSURE THAT ALL CIRCUIT BREAKERS ARE RESET
20A AC BREAKER
PUSH TO RESET
20A
AC 120V
MAX
120VAC 20A
Receptacles
and Breaker
Page 8
Switch
Choke Knob
ENGINE SWITCH
ON
OFF START
20A AC BREAKER 30A AC BREAKER
PUSH TO RESET PUSH TO RESET
20A
AC 120V
MAX
AC
120V
120VAC 20A
Receptacles
and Breaker
120VAC 30A
Receptacle
and Breaker
Figure A: Control panel
For technical questions, please call 1-888-866-5797.
120/240VAC
46A Breakers
46A AC BREAKER
CHOKE
RESET
Pull at Start.
Push when Running.
30A AC BREAKERS
PUSH TO RESET
AC 120
30A
30A
/240V
MAX
MAX
120/240VAC
30A Receptacle
and Breakers
Low Oil Alert
12VDC Receptacle
and Breaker
LOW OIL ALERT
PUSH TO RESET
DC 12V 8.3A
MAX
AC 120
/240V
46A MAX
GROUND
Ground
Terminal
120/240VAC 46A
Receptacle
ITEM 61725