Using The Bluetooth Cellular Phone; Deleting A Registered Device; When A Call Comes In; To End The Call - JVC EXAD KD-AVX11 Instructions Manual

Deleting a registered device

1
Select "Bluetooth Phone" or "Bluetooth
Audio," then select a registered device you
want to delete.

Using the Bluetooth cellular phone

POWER]ON
Adjust the
volume
~
Select "Bluetooth Phone."
Ÿ
Enter the <Bluetooth> menu.
!
Establish the connection with a device,
then make a call (or settings using the
<Bluetooth> menu).
☞ pages 37, 44 – 46

When a call comes in...

Name and phone number (if acquired)
• The source is automatically changed to
"Bluetooth Phone."
2
Perform steps 2 and 3 on page 22, then...
• Select <Delete Pair>, then <Yes>.
Connected device
Bluetooth icon
1
*
lights up when the adapter is connected.
name
Bluetooth Phone
Connected Device Name
Status of the device
Signal strength/Battery remainder
Each time you press 5 ∞, the registered device name
* 1
(and "NEW DEVICE" when a new device can be registered)
appear in turn.
* 2
Appears only when the information comes from the
device.
When <Auto Answer> is activated...
The unit answers the incoming calls automatically.
(☞ page 46)
• When <Auto Answer> is deactivated, press any
button (except
incoming call.

To end the call

Hold any button (except
• You can adjust the microphone volume level. (☞
page 46)
24
FLAT
3:45 PM
* 2
ATT or +/–) to answer the
ATT or +/–).