Makita BTW200 Instruction Manual page 5

USE025 1
Specific Safety Rules
1.
Hold tool by insulated gripping surfaces w h e n performing an operation where
the c u t t i n g tool may contact hidden wiring. Contact w i t h a "live" wire will
also make exposed metal parts
of
the tool "live" and shock the operator.
2.
Be aware that this tool i s always
in
an operating condition, because it does
n o t have t o be plugged into an electrical outlet.
3. Wear ear protectors.
4.
Check the socket carefully for wear, cracks or damage before installation.
5. Hold the t o o l firmly.
6. Always be sure you have a f i r m footing.
7.
Be sure n o one
is below w h e n using t h e t o o l in high locations.
8. The proper fastening torque may differ depending upon the kind or size of
the bolt. Check t h e torque w i t h a torque wrench.
SYMBOLS
The followings s h o w the symbols used
for
tool.
V
....................................
volts
- =
....................................
direct current
% .................................... no load speed
.../
min
...................................
revolutions or reciprocation per minute
b
....................................
number
of
blow
5