Diving; Diving In The Air Mode (Dive Air) - Suunto D9tx User Manual

6. DIVING

This section contains instructions on how to operate the dive computer and interpret
its displays. The dive computer is easy to use and read. Each display shows only the
data relevant to that specific diving mode.

6.1. Diving in the AIR mode (DIVE Air)

This section contains information on diving with standard air. To activate the DIVE Air
mode, please refer to Section 5.9.1. Accessing DIVE mode.
NOTE
NOTE
DIVE HAS JUST BEGUN AND
AVAILABLE NO-DECOMPRESSION
TIME IS OVER 99 MINUTES SO NO
VALUE IS DISPLAYED.
The dive computer will remain in the SURFACE mode at
depths less than 1.2 m/4 ft. At depths greater than 1.2 m/4 ft
the instrument will go into the DIVE mode automatically.
However, it is recommended that you activate the SURFACE
mode manually before entering the water in order to perform
the necessary dive pre-checks.
The default fields shown on your dive computer in the DIVE
mode are the ones you select while in the SURFACE mode.
77