Audio Settings - Sharp Aquos LC-80LE642U Operation Manual

On-Screen Display Menu
Film Mode (3:2 pull-down)
This function provides high-quality playback of
images originally encoded at 24 frames/second,
such as films.
Advanced: Adjusts effect to reduce judder from film
contents. You can select a desired level of judder
reduction from 0 to +10.
Standard: Plays back images with equal display
time for each frame, reproducing movie theater
experience.
Off: Normal viewing mode.
NOTE
• "Film Mode" does not function depending on input
signal type.
• "Film Mode" does not function when you set AV MODE
to "GAME" or "PC".
• "Standard" does not function depending on input
signal type.
Digital Noise Reduction
Produces a clearer video image.
Auto: Automatically adjusts the level of noise
reduction.
High/Middle/Low: You can select a desired level
for viewing a clearer video image.
Off: No adjustment.
NOTE
• "Digital Noise Reduction" is not available when you set
AV MODE to "PC" or PC format is being input.
• When AV MODE is set to "GAME", "AUTO" is not
available.
Monochrome
For viewing a video in monochrome.
Range of OPC
The brightness level range of the OPC sensor's
automatic adjustments can be set according to your
preferences.
The adjustment range of the OPC sensor can be set
to a maximum of +16 and a minimum of –16.
Max.: –15 through +16
Min.: –16 through +15
NOTE
• The "Range of OPC" settings are active only when
"OPC" is set to "On".
• The maximum setting cannot be set to a smaller
number than the minimum setting.
• The minimum setting cannot be set to a bigger number
than the maximum setting.
• Depending on the brightness of the surrounding light, the
OPC sensor might not operate if the adjustment range is
small.

Audio Settings

You can adjust the sound quality to your preference
with the following settings.
NOTE
• For operating the on-screen display menu, see page 20.
Selected item c button d button
For weaker For stronger
Treble
treble treble
For weaker For stronger
Bass
bass bass
Decrease audio Decrease audio
Balance from the right from the left
speaker speaker
NOTE
• The Audio menu is grayed out when "Output Select" is
set to "Variable". (See page 25.)
• For resetting Audio adjustment items to the factory
preset values, press a/b to select "Reset", press
ENTER, press a/b to select "Yes", and then press
ENTER.
Auto Volume
Different sound sources sometimes do not have
the same loudness level, such as a program and its
commercial breaks. The Automatic Volume Control
(Auto Volume) reduces this problem by equalizing
levels.
High: R educes the loudness gaps among different
sound sources strongly.
Middle:
Low: Reduces the loudness gaps among different
sound sources slightly.
NOTE
• The Audio Settings menu is grayed out when "Output
Select" is set to "Variable". (See page 25.)
Surround
The surround function produces Surround effect
from the speakers.
NOTE
• The Audio Settings menu is grayed out when "Output
Select" is set to "Variable". (See page 25.)
• For some discs, setup may be required on your BD/
DVD player. In this case, please refer to the operation
manual of your BD/DVD player.
Bass Enhancer
This function allows you to enjoy bass-enhanced
sound.
NOTE
• The Audio Settings menu is grayed out when "Output
Select" is set to "Variable". (See page 25.)
Clear Voice
This function emphasizes speech against
background noise for greater clarity.
NOTE
• The Audio Settings menu is grayed out when "Output
Select" is set to "Variable". (See page 25.)
23