Subaru 2015 Forester Owner's Manual page 64

Remove the covers and locate the lower
anchorages (bars).
3. Remove the rear seat head restraint.
For details, refer to Head restraint adjust-
ment 1-9.
CAUTION
Store the head restraint that has
been removed in the cargo area.
Avoid placing the head restraint in
the passenger compartment to pre-
vent it from being thrown around in
the passenger compartment in a
sudden stop or a sharp turn.
4. For models with rear seat reclining
mechanism, adjust the seatback to the
upright position.
Seat, seatbelt and SRS airbags/Child restraint systems
5. While following the instructions sup-
plied by the child restraint system manu-
facturer, connect the lower hooks onto the
lower anchorages located at
the bottom of the rear seatback. When the
hooks are connected, make sure the
adjacent seatbelts are not caught.
6. [If your child restraint system is of a
flexible attachment type (which uses
tether belts to connect the child restraint
marks on system properly to the lower anchorages)]
While pushing the child restraint into the
seat cushion, pull both left and right lower
tether belts up to secure the child restraint
system firmly by taking up the slack in the
belt.
7. Latch the top tether hook onto the
tether anchorage that is located behind
the rear seat and tighten the top tether
firmly. For additional instructions, refer to
Top tether anchorages
1-35
1-36.
CONTINUED