Table of Contents
Advertisement
OPERATION
SECTION 4
IMPORTANT! There must be a clear "line of sight" to the satellite (See Fig. 2, Page 3). Masts, antennas,
obstructions on the vessel, etc. can all block the satellite signal from reaching the dish.
Note: This example is for the DTV 101 satellite in Region 2-North Central. The information on your controller will
vary depending on the satellite and region you have chosen.
Note: The VuQube must remain powered on to maintain a signal.
To turn the VuQube off, simultaneously press ENTER and "-".
Page 6
Advertisement
Table of Contents
