Subaru 2014 BRZ Owner's Manual page 399

5-2. Steps to take in an emergency
Vehicles with a manual transmission
Ensure that the shift lever is in neutral and depress the clutch
STEP 1
pedal.
STEP 2
When the keyless access with push button start system is deacti-
vated in customization setting, the push-button ignition switch will
turn to “"ACC”" mode. Modes can be changed by pressing the push-
button ignition switch with the clutch pedal released. (The mode
changes each time the switch is pressed.)
Firmly depress the clutch pedal and check that the keyless
STEP 3
access with push button start system indicator light (green)
turns on.
Press the push-button ignition switch.
STEP 4
In the event that the push-button ignition switch still cannot be oper-
ated, contact your SUBARU dealer.
398
Touch the SUBARU emblem
side of the access key to the
push-button ignition switch.
When the access key is detected,
a buzzer sounds and the push-
button ignition switch will turn to
“"ON”" mode.