Subaru 2014 BRZ Owner's Manual page 143

1-7. Safety information
STEP 4
If the child restraint has a top tether strap, the top tether strap
STEP 5
should be latched onto the top tether strap anchor. ( P. 143)
Booster seat
I
STEP 1
STEP 2
142
While pushing the child restraint
system into the rear seat, allow
the shoulder belt to retract until
the child restraint system is
securely in place.
After the shoulder
retracted to a point where there is
no slack in the belt, pull the belt to
check that it cannot be extended.
Place the child restraint system
on the seat facing the front of the
vehicle.
Sit the child in the child restraint
system. Fit the seatbelt to the
child restraint system according
to the manufacturer's instruc-
tions and insert the plate into the
buckle. Make sure that the belt is
not twisted.
Check that the shoulder belt is
correctly positioned
child's shoulder and that the lap
belt is as low as possible.
( P. 58)
belt has
over the