Set Date And Time - Axis Camera Station User Manual

Set Date and Time

Configure the date and time for your Axis product to follow the date and time of your
workstation, an NTP server, or set the date and time manually.
Camera time
This box lists the current date and time for your Axis product.
Time zone
Using the drop down menu, select the time zone you want to use with your Axis product.
The default time zone is Greenwich Mean Time (GMT).
You can also select to enable Automatically adjust for daylight saving time changes if your product is located in an area that
uses daylight savings time.
Time mode
Select whether the camera or group of cameras will be synchronized with:
• The computer time of the workstation used to manage the cameras
• An NTP server
• Or set the time manually
Synchronize with server computer time - Select this option to enable the date and time of your product to be synchronized
with the server computer time.
Synchronize with NTP server - Select this option to enable the date and time of your product to be synchronized with an
NTP server.
Obtain from DHCP - Select this option to use an NTP server whose IP address was discovered using DHCP.
Use server - If there is an NTP server that you want to use for date and time synchronization, and you know its IP address,
you can select this option to manually fill in the correct IP address.
Set manually - Select this option to manually set the correct date and time.
AXIS Camera Station - Camera Management
54