Advertisement
Nomenclature
Access Point (Master)
WE70-AP(-EU/-US/-CN)
INIT Button
Used to operate using default
settings.
POWER Indicator (Green)
Displays the power source status and
the operation mode of the Wireless
LAN Unit.
MODE Indicator (Orange)
Displays the operating mode of the
Wireless LAN Unit.
Client (Slave)
WE70-CL(-EU/-US/-CN)
RSSI Button
Switches the received signal status
indicator to flashing or four-level lit
display.
INIT Button
Used to operate using default settings.
POWER Indicator (Green)
Displays the power source status and
the operation mode of the Wireless
LAN Unit.
RSSI Indicator (Orange)
Displays the received signal strength
by flashing.
Note: When the RSSI Button on the back of the WE70 is pressed, the received signal
strength will be indicated using the POWER, RSSI, LAN, and WIRELESS indicators.
The POWER indicator will flash. Press the button again or wait for 10 minutes of the
indication to pass and then the indication will return to the original status.
Antenna Connector
Used to connect enclosed
Antennas.
Note: To ensure good
performance, always
connect both of the
Antennas.
LAN port (RJ-45 × 1)
Connect a network device, such
as a hub, through a LAN cable.
DC Connector
Supplies 24 VDC power.
WIRELESS Indicator (Orange)
Displays the status of the
Wireless LAN
LAN Indicator (Orange)
Displays the status of the wired
LAN.
Antenna Connector
Used to connect enclosed
Antennas.
Note: To ensure good
performance, always
connect both of the
Antennas.
LAN port (RJ-45 × 1)
Connect a network device, such
as a hub, through a LAN cable.
DC Connector
Supplies 24 VDC power.
WIRELESS Indicator (Orange)
Displays the status of the
Wireless LAN.
LAN Indicator (Orange)
Displays the status of the wired
LAN.
Access Point Indicator
Indicator
Color
Status
POWER
Green
Lit
Not lit
Flashing Simultaneous flashing of MODE and
MODE
Orange Lit
Not lit
Flashing Simultaneous flashing of MODE and
WIRELESS Orange Lit
Not lit
LAN
Orange Lit
Not lit
Flashing Data is being transmitted.
Note: Hold down the initialization switch while the power is OFF and
then turn the power ON without releasing the switch.
Initialization can also be applied from the settings window using
a web browser.
Client Indicator
Indicator
Color
Status
POWER
Green
Lit
Not lit
Flashing Simultaneous flashing of the RSSI
RSSI
Orange Not lit
Flashing Level 1, duty 2 (OFF): Flashes for 1
Flashing Level 2, duty 1 (OFF): Flashes for 2
Lit
Flashing Simultaneous flashing of MODE
WIRELESS Orange Lit
Not lit
LAN
Orange Lit
Not lit
Flashing Data is being transmitted.
Note: Hold down the initialization switch while the power is OFF and
then turn the power ON without releasing the switch.
Initialization can also be applied from the settings window using
a web browser.
FA Wireless LAN Unit
Meaning (primary error)
Power ON
Power OFF
POWER indicators shows that the
setup is being initialized. (See note.)
Using IEEE 802.11a
Using IEEE 802.11b/g
POWER indicators shows that the
setup is being initialized. (See note.)
Radio communications are being
established with the Wireless LAN
client.
There is no LAN Client
communicating with the Wireless
Unit, or no radio communication has
been made for 5 minutes or more.
LAN connection is normal.
LAN is not connected.
Meaning (primary error)
Power ON
Power OFF
and POWER indicators shows that
the setup is being initialized. (See
note.)
No margin
(ON)
(ON)
Level 3
and POWER indicators shows that
the setup is being initialized. (See
note.)
Radio communications are being
established with the Wireless LAN
Access Point.
There is no wireless LAN Access
Point communicating with the
Wireless LAN UNIT, or no radio
communication has been made for
more than 10 seconds.
LAN connection is normal.
LAN is not connected.
WE70
9
Advertisement
