Radio Operations; Listening To The Radio - JVC KS-FX921 Instruction Manual

Listening to the radio

You can use either automatic searching or manual
searching to tune in to a particular station.
Searching a station automatically:
Auto search
1
Select the band (FM1 – 3, AM).
Each time you press the
button, the band changes as
follows:
FM 1 FM 2
(F1) (F2)
Lights up when receiving an FM stereo
broadcast with sufficient signal strength.
* When "CLOCK" is set to "ON" (see page 19),
the current indication will soon change to the
clock time.
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to an
FM broadcast.
2
Start searching a station.
When a station is received, searching stops.
FM 3 A M
(F3)
Selected band appears*.
To search stations of
higher frequencies
To search stations of
lower frequencies

RADIO OPERATIONS

To stop searching before a station is received,
press the same button you have pressed for
searching.
Searching a station manually:
Manual search
1
Select the band (FM1 – 3, AM).
FM 1
(F1)
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to an
FM broadcast.
2
Press and hold ¢
until "MANU" (manual) starts
flashing on the display.
CONTINUED ON THE NEXT PAGE
Each time you press the
button, the band changes as
follows:
FM 2 FM 3 A M
(F2) (F3)
or 4
9