Table of Contents
Advertisement
1
Turning on the power
1
Turn on the power.
Note on One-Touch Operation:
When you select a source in step 2 below, the
power automatically comes on. You do not have
to press this button to turn on the power.
2
Select the source.
To operate the tuner (FM or AM),
see pages 9 – 11.
To play a tape,
see pages 12 – 15.
To operate the CD changer,
see pages 22 – 26.
To operate the external component
(LINE IN), see page 27.
3
Adjust the volume.
3
2
To increase the volume
To decrease the volume
BASIC OPERATIONS
4
Adjust the sound as you want. (See
pages 16 and 17.)
To drop the volume in a moment
Press
briefly while listening to any
source. "ATT" starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press the
button briefly again.
• If you turn the control dial, you can also restore
the sound.
To turn off the power
Press and hold
second.
"SEE YOU" appears, then the unit turns off.
Volume level appears.
Volume (or audio) level indicator
(see page 19)
for more than one
7
Advertisement
Table of Contents
