The Remote Control - Panasonic TY-42TM6MA Operating Instructions Manual

The remote control

ASPECT button
Change aspect (see page 8).
RECALL button
Display the channel, the audio mode,
the remaining time of SLEEP timer, etc.
POWER button
Turn the display ON or OFF.
POWER
RECALL
CH
ASPECT
VOL ACTION
CH
SAP
R-TUNE TV/VIDEO INPUT
6
Control reference of Tuner board and Display
Note
For the common features, be sure to use the remote control of Tuner board.
• Watching TV programs
• Tuning TV channels
• Adjusting the volume
• Muting the sound
• Selecting the aspect mode
• Displaying the current setting etc.
MUTE button
Mute the sound or • Selecting the input mode of Tuner board
cancel the mute. • Displaying the current setting etc. of Display
• Selecting the input mode of Display
• Turning the display On/Off
• You cannot select the source of INPUT 1 (TV or VIDEO1) with the
display's remote control.
• Use the remote control of the display when adjusting "PICTURE
POSITION/SIZE" and "SURROUND" on the display. Refer more details
MUTE
of the display's controls to the display's operating instructions.
VOL
The remote control
of Tuner board
Cursor buttons ( , , ,
ACTION button
Channel buttons (CH , CH
Volume buttons (VOL , VOL )
Increase (VOL ) or reduce (VOL
SAP button
Select the audio mode (see page 7).
R-TUNE button
Return to previously viewed channel or video mode.
INPUT button
Select the input mode.
Each time you press the button:
INPUT 1 INPUT 3
• SLOT 1 and 2 (Tuner board) correspond to INPUT 1, SLOT
3 to INPUT 3 and PC IN to PC input.
∗ 3 slots model only. You can select INPUT 3 only when a
terminal board is set to SLOT 3.
TV/VIDEO button
Select the source of INPUT 1 from TV or VIDEO1.
• This does not work for INPUT 3 or PC input.
• To give a label or to skip VIDEO1 input (see page 10,
CHANNELS menu-INPUT LABEL)
Numbered buttons
The remote
control of Display
),
)
) volume.
PC input