Sony DAV-SR4W Owner's Manual page 88

To set the item, press X/x, then press
ENTER or AMP MENU.
You can set the following items. The
default settings are underlined.
xSP SETUP
CENTER SP
(center
speaker)
SURR SP
(surround
speakers)
SURR B SP
(surround
back
speaker)
F DIST
(front
distance)
b)
1.6m
CEN DIST
(center
distance)
b)
1.6m
SURR DIST
(surround
distance)
b)
1.6m
SB DIST
(surround
back
distance)
b)
1.6m
c)
SP POS
(surround
speakers
position)
a)
This setting appears when you set "SURR SP"
to "SURR Y" in "SP SETUP."
GB
88
CENTER Y: Select this if you
use a center speaker.
CENTER N: Select this if no
center speaker is used.
SURR Y: Select this if you
use surround speakers.
SURR N: Select this if no
surround speaker is used.
a)
SURR B N: Select this if no
surround back speaker is
used.
SURR B Y: Select this if you
use a surround back speaker.
Front speaker distance from
the listening position can be
set in 0.2 meter increments
from 1.0 to 7.0 meters.
c)
Center speaker distance can
be moved up to 1.6 meters
closer to the listening position
from the front speaker
distance, in 0.2 meter
increments.
c)
Surround speaker distance
can be moved up to 4.6 meters
closer to the listening position
from the front speaker
distance, in 0.2 meter
increments.
c)
Surround back speaker
distance can be moved up to
4.6 meters closer to the
listening position from the
front speaker distance, in 0.2
meter increments.
SP BEHIND: Select this if
surround speakers are located
in the back area of the
listening position.
SP SIDE: Select this if
surround speakers are located
in the side area of the listening
position.
b)
When you perform the Quick Setup (page 31),
the default settings are changed.
c)
This setting appears when you set the
corresponding speaker to "Y" in "SP SETUP"
(page 88).
xLEVEL
TEST TONE
T. TONE OFF: The test tone is
(test tone)
not emitted from the speakers.
T. TONE ON: The test tone is
emitted from both left and
right speakers simultaneously
while adjusting balance. When
you select one of the
"LEVEL" items, the test tone
is emitted from each speaker in
sequence.
F BALANCE Adjusts the balance between
(front
the front left and right
balance)
speakers. (You can adjust from
0
the center 6 steps left (L6) or
right (R6).)
b)
CEN LEVEL Adjusts the level of the center
(center level)
speaker (–6 dB to +6 dB, 1 dB
a)
0
increments).
b)
SL LEVEL
Adjusts the left level of the
(surround
surround speaker (–6 dB to +6
left level)
dB, 1 dB increments).
a)
0
b)
SR LEVEL Adjusts the right level of the
(surround
surround speaker (–6 dB to +6
right level)
dB, 1 dB increments).
a)
0
b)
SB LEVEL Adjusts the level of the
(surround
surround back speaker (–10
back level)
dB to +10 dB, 1 dB
a)
0
increments).
SW LEVEL Adjusts the level of the
(subwoofer
subwoofer (–6 dB to +6 dB, 1
level)
dB increments).
a)
+4
AUDIO DRC
DRC OFF: No compression of
(dynamic
DYNAMIC range.
compression)
DRC ON: Reproduces the
sound track with the kind of
DYNAMIC range that the
recording engineer intended.
a)
When you perform the Quick Setup (page 31),
the default settings are changed.
b)
This setting appears when you set the
corresponding speaker to "Y" in "SP SETUP"
(page 88).