Sony DAV-SR4W Owner's Manual page 23

To change the color system (PAL or NTSC)*
* Asian, Australian, and Saudi Arabian models only.
Depending on the TV to be connected, you may be required to select either PAL or NTSC of the
system.
The initial setting of the system for Australian and Saudi Arabian models is PAL.
The initial setting of the system for Asian models is NTSC.
If the color system of the TV is PAL
To set the system to PAL from NTSC, turn on the system by pressing "/1 on the remote while pressing
. on the system.
You need to hold . until the set powers on.
To reset to NTSC, turn off the system and then turn on again by pressing "/1 on the remote while
pressing and holding . on the system.
If the color system of the TV is NTSC
Do the same operation above to set the system to NTSC from PAL.
When connecting to a standard 4:3 screen TV
Depending on the disc, the image may not fit your TV screen.
If you want to change the aspect ratio, please refer to page 80.
Does your TV accept progressive signals?
Progressive is the method for displaying TV images which reduces flickering, and sharpens the image.
To display using this method, you need to connect to a TV that accepts progressive signals and set the
output signal of COMPONENT VIDEO OUT to the progressive format. For details, see "To set to
[PROGRESSIVE]" on page 81.
If your TV does not accept progressive signals and progressive format
is set by mistake
The image may not appear, or will appear distorted. In this case, return the setting to interlace format.
FUNCTION
1
Press FUNCTION repeatedly until "DVD" appears in the front panel display.
2
While holding down ., press FUNCTION.
The output signal is changed to interlace format.
.
23 GB