System Setup; Setting Procedure - Contec SVR-MMF(FIT) User Manual

5. System Setup

Setting Procedure

The IP address set for the Monitoring & Control Server must not be
already used by an I/O Assist Server, I/O controller, or other unit.
The default factory settings are IP address = "10.1.1.1" and network
mask = "255.0.0.0".
(1) Connect the power and network cables to the Monitoring &
(2) The Monitoring & Control Server searches for any I/O Assist
(3) By connecting to the Monitoring & Control Server Unit from
(4) For procedures on how to view input data using a browser, see
Control Server Unit.
Servers and I/O controllers and starts collecting input data
automatically.
the browser running on the host controller, you can view the
input data.
Set the IP address and the network mask so that the host
controller belongs to the same network as the Monitoring &
Control Server Unit.
the section entitled "Verifying the Operation".
SVR-MMF(FIT)
System Setup
29