Suzuki SV1000 Service Manual page 11

10 SV1000K3
Set the harness of the handle
inside of each hoses.
Speedometer wire
Horn
Set the connector and
harness between the
frame and reservoir tank.
Set " " mark exhaust side.
Taping clamp
Turn signal (RH, LH)
Clamp
Wiring harness
Neutral switch
Clamp the harness without
contact to the bracket.
Don't slacken.
Rear turn signal light
Set surely.
Set the coupler inside triangle area
between the frame and fender.
Set the high tension cord rear side
as much as possible without contact
with the fuel tank.
Inside of the head light
Clamp
Harness
(L)
Licence lamp
Wiring harness