Backlighting; Sound Warning - DigiTech Mistral3 User Manual

General information

Backlighting

In order to use the chronometer in places where light is insufficient, or at
night, you can enable the display backlighting.
During normal operation and not when setting, press the
continuously, to toggle between the three available backlighting options:
Always Backlighting remains always on.
The
When the backlighting turns on by pressing any key. It remains on for
needed
4 second, and then it turns off automatically
.The
Off Backlighting remains always off.
The

Sound warning

The
the headphone and with an internal buzzer.
By pressing the
All The
The beep is generated at every change of second, both in the
headphone and to the internal buzzer.
HeadphoneThe
The internal buzzer is disabled and signals are generated only
in the headphone..
Off The
No sound is played.
4
symbol of the display remains fixed
symbol on the display blinks
symbol of the display remains off.
can sound a beep at every change of second, both in
key continuously, you can toggle between:
symbol on the display is on and fixed.
symbol on the display blinks.
symbol on the display remains off.
english
key