Table of Contents
Advertisement
■ Installation Guideline
The installation must be in compliance with the National Electrical Code, your local electrical and plumbing
codes.
1. Make sure the appliance is intact, and the fittings are complete.
2. Please make sure the main power supply, water pressure, grounding condition, ammeter and wires meet the
standard of installation requirements.
3. The appliance must be connected to properly ground dedicated branch circuits of proper voltage rating. Ground
must be brought to the "ground" at the circuit breaker panel.
4. This appliance MUST be permanently connected to the fixed circuit breaker. If you don't use the heater, please
switch off the circuit breaker.
5. DO NOT install this appliance near to tinder or strong magnetic field places. The unit must only be mounted in
VERTICAL position near by the water fittings. Please electrify try the machine after getting through waterway.
■ Installation Method
●
Fixed installation on the wall
MS-PSU Series
Locate an appropriate place on a section of wall as above mentioned.
Fig 1
Front and back of the appliance
Fig 2
Remove screw which fixed the bracket on back of the appliance.
6
Advertisement
Table of Contents
