1. FuNNEL CovEr 2. FuNNEL 3. CLamP 4. maiNS SwiTCh 5. STaND 6. STaND LEgS 7. moTor houSiNg 8. LoCkiNg BuTToN * Not all the accessories illustrated or described are included in standard delivery. TECHNICAL DATA Voltage 120V~60Hz Amps No load speed 8500/min Cutting diameter 13’’...
sAFETY INsTrUCTIoNs footwear is recommended when working outdoors. Wear protective hair covering to imPorTaNT SaFETY iNSTruCTioNS contain long hair. 5) Use Safety Glasses - Always use face or warNiNg! When using electric dust mask if operation is dusty. gardening appliances, basic safety 6) Use Right Appliance - Do not use appliance precautions should always be followed to for any job except that for which it is...
Page 7
Keep cord from heat, oil, and sharp edges. Table 57.1 minimum gauge for extension 12) Don’t grasp the exposed cutting blades or cords cutting edges when picking up or holding Volts Total length of cord in feet the appliance. (For grass shears and 120V similar appliances only.) 240V...
Page 8
designed for use with this leaf mulcher. objects are not included. Using other parts or accessories could 15. Do not force the leaf mulcher. It will do the increase risk of injury. job better and with less likelihood of a risk 3.
sYMBoLs oPErATIoN INsTrUCTIoNs NoTE: Before using the tool, read the Arrows show direction objects will be thrown by line rotation. instruction book carefully. AssEMBLE THE MACHINE Wear eye protection CauTioN: Take care when taking the components out of the color box.
With the mulcher running, feed double warNiNg! For optimum handfuls of dry leaves, or single handfuls of performance use only worX wet leaves, into the funnel. Allow the machine branded replacement lines. aftermarket to shred the load completely and regain speed monofilament lines having max before inserting the next handful.
Page 11
result in permanent damage to your motor and /or injury and will void the manufacturer’s warranty. immediately replace any worn parts of the spinner head. 3. SToragE (See Fig o) When the leaf mulcher is stored at the end of the season, disassembles and stack in the following order: (a) Place the funnel into the stand, (b) Fit the motor into the funnel.
Need help?
Do you have a question about the WG430 and is the answer not in the manual?
Questions and answers