Using Ta Standby Reception - JVC kd-sc601 Instructions Manual

1
Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(PSM: see pages 31 and 32.)
2
Select "AF-REG" (alternative
frequency/regionalization reception)
if not shown on the display.
3
Select the desired mode—"AF,"
"AF REG," or "OFF."
4
Finish the setting.
14

Using TA Standby Reception

TA Standby Reception allows the unit to switch
temporarily to Traffic Announcement (TA) from
the current source (another FM station, CD, or
other connected components).
• TA Standby Reception will not work if you are
listening to an AM station.
Press T TP/PTY to activate TA Standby Reception.
7 When the current source is FM, the TP
indicator either lights up or flashes.
• If the TP indicator lights up, TA Standby
Reception is activated.
If a station starts broadcasting a traffic
announcement, "TRAFFIC" appears on the
display, and this unit automatically tunes in to
the station. The volume changes to the
preset TA volume level (see page 18) and the
traffic announcement can be heard.
• If the TP indicator flashes, TA Standby
Reception is not yet activated since the
station being received does not provide the
signals used for TA Standby Reception.
To activate TA Standby Reception, you need
to tune in to another station providing these
signals. Press ¢
for such a station.
When a station providing these signals is
tuned in, the TP indicator stops flashing and
remains lit. Now TA Standby Reception is
activated.
7 When the current source is other than FM,
the TP indicator lights up.
If a station starts broadcasting a traffic
announcement, "TRAFFIC" appears on the
display, and this unit automatically changes the
source and tunes in to the station.
To deactivate the TA Standby Reception,
press T TP/PTY again. The TP indicator
disappears.
or 4
to search