Ten-Haaft D5000 Operating Instructions Manual page 23

Timer and Stand-by:
The timer is only active when the system is switched on or has been set to sleep
mode with the antenna open. The timer is inactive in stand-by mode. The antenna
does never open automatically and without direct user control.
In sleep mode, the system checks whether there are timer programs that have to be
processed. In this case, the sat mouse will show four vertical bars (||||), indicating
that the system is in timer stand-by and is hence being controlled by the timer
which will reactivate the system at the preset time. The power consumption in
timer stand-by is higher than in regular stand-by.
22